Wyze Outdoor Plug

Initial Install

This device requires a triangle screw driver bit to remove the cover and use the serial header for the first upload.

GPIO Pinout

Pin	Function
GPIO5	Status LED
GPIO18	Button 1
GPIO17	Button 2
GPIO15	Relay 1
GPIO32	Relay 2
GPIO19	Relay 1 LED
GPIO16	Relay 2 LED
GPIO34	LUX Sensor
GPIO25	SEL
GPIO27	CF
GPIO26	CF1

Notes

• The Lux sensor is a binary sensor and can be used like a daylight sensor. (e.g. turn on lights when it gets dark)
• This device can be used as a Bluetooh proxy in Home Assistant see the docs on how to enable

Basic Configuration

# Basic Config
substitutions:
  display_name: WyzeOutdoor
  # Higher value gives lower watt readout
  current_res: "0.001"
  # Lower value gives lower voltage readout
  voltage_div: "770"

esphome:
  name: wyzeoutdoor

esp32:
  board: esp-wrover-kit
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
logger:
api:
ota:

# Device Specific Config
switch:
  - platform: gpio
    name: ${display_name} Relay1
    pin:
      number: GPIO15
      inverted: false
    id: relay1
    on_turn_on:
      - light.turn_on: relay1_led
    on_turn_off:
      - light.turn_off: relay1_led
  - platform: gpio
    name: ${display_name} Relay2
    pin:
      number: GPIO32
      inverted: false
    id: relay2
    on_turn_on:
      - light.turn_on: relay2_led
    on_turn_off:
      - light.turn_off: relay2_led
  - platform: restart
    name: ${display_name} Restart

output:
  - platform: gpio
    pin: GPIO19
    inverted: True
    id: relay1_led_gpio
  - platform: gpio
    pin: GPIO16
    inverted: True
    id: relay2_led_gpio

light:
  - platform: binary
    name: "Relay1 LED"
    id: relay1_led
    internal: true
    output: relay1_led_gpio
  - platform: binary
    name: "Relay2 LED"
    id: relay2_led
    internal: true
    output: relay2_led_gpio

sensor:
  - platform: adc
    pin: GPIO34
    name: "${display_name} LUX"
    id: lux_sensor
    device_class: illuminance
    unit_of_measurement: lx
    attenuation: 12db
  - platform: hlw8012
    sel_pin:
      number: GPIO25
      inverted: true
    cf_pin: GPIO27
    cf1_pin: GPIO26
    current_resistor: ${current_res}
    voltage_divider: ${voltage_div}
    change_mode_every: 3
    update_interval: 3s
    current:
      name: "${display_name} Amps"
      unit_of_measurement: A
      accuracy_decimals: 2
    voltage:
      name: "${display_name} Volts"
      unit_of_measurement: V
      accuracy_decimals: 1
    energy:
      name: "${display_name} Energy"
    power:
      name: "${display_name} Watts"
      unit_of_measurement: W
      accuracy_decimals: 0
      filters:
        - calibrate_linear:
            - 0.0 -> 0.0
            - 134 -> 58

binary_sensor:
  - platform: gpio
    internal: true
    pin:
      number: GPIO18
      mode: INPUT_PULLDOWN
      inverted: False
    name: ${display_name} Button1
    on_press:
      - switch.toggle: relay1
  - platform: gpio
    internal: true
    pin:
      number: GPIO17
      mode: INPUT_PULLDOWN
      inverted: False
    name: ${display_name} Button2
    on_press:
      - switch.toggle: relay2
  - platform: template
    name: ${display_name} daylight
    device_class: light
    lambda: |-
      // the senor reads 3.1 volts if there is light and 0.5 if there is not light not much inbetween
      if (id(lux_sensor).state > 2) {
        // there is daylight outside.
        return true;
      } else {
        // there is no daylight outside (e.g. it is dark).
        return false;
      }

status_led:
  pin:
    number: GPIO5
    inverted: true