DETA Grid Connect Smart Inline Switch 6000HA

General Notes

The DETA Smart Inline Switch are made by Arlec as part of the Grid Connect ecosystem, and are sold at Bunnings in Australia and New Zealand. They can be flashed without disassembly or soldering using tuya-convert if still old stock, newer stock with updated Tuya firmware require dissassembly, soldering and flashing via serial.

GPIO Pinout

Pin	Function
GPIO1	Button
GPIO13	Blue LED
GPIO14	Relay

Getting it up and running

Tuya Convert

These switches are Tuya devices, so if you don't want to open them up to flash directly, you can use tuya-convert to initially get ESPHome onto them. After that, you can use ESPHome's OTA functionality to make any further changes.

• Put the switch into "smartconfig" / "autoconfig" / pairing mode by holding any button for about 5 seconds.
• The status LED blinks rapidly to confirm that it has entered pairing mode.

Basic Configuration

# Basic Config
# https://www.bunnings.com.au/deta-grid-connect-smart-inline-switch_p0098816
substitutions:
  device_name: "deta_smart_inline_switch_1"
  name: "Deta Smart Inline Switch 1"

esphome:
  name: ${device_name}
  comment: ${name}

esp8266:
  board: esp01_1m
  board_flash_mode: dout
  restore_from_flash: true

wifi:
  networks:
    - ssid: SSID
      password: Password
    - ssid: SSID Secondary
      password: Password
  ap:
    ssid: ${device_name} Hotspot
    password: "Password"

captive_portal:

logger:
  #level: VERBOSE

api:

ota:

web_server:
  port: 80

time:
  - platform: homeassistant
    id: homeassistant_time

output:
  - platform: esp8266_pwm
    id: blue_led_output
    pin:
      number: GPIO13
      inverted: True

light:
  - platform: monochromatic
    name: ${device_name} Blue LED
    output: blue_led_output
    id: blue_led
    internal: True

sensor:
  - platform: uptime
    name: ${device_name} Uptime

  - platform: wifi_signal
    name: ${device_name} Wifi Signal
    update_interval: 60s

text_sensor:
  - platform: version
    name: ${device_name} ESPHome Version
  - platform: wifi_info
    ip_address:
      name: ${device_name} IP

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO1
      inverted: True
    id: button
    name: ${device_name} Button
    on_press:
      - switch.toggle: relay_template
    internal: True

switch:
  - platform: gpio
    pin: GPIO14
    id: relay

  # tie the led & relay operation together and report status based on relay state
  - platform: template
    name: ${device_name} Relay
    id: relay_template
    lambda: |-
      if (id(relay).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      - light.turn_on: blue_led
      - switch.turn_on: relay
    turn_off_action:
      - light.turn_off: blue_led
      - switch.turn_off: relay