Holman RGB Wifi Connected Controller

General Notes

Available from Bunnings

Uses TYWE3L module. Can be programmed without removing from PCB.

GPIO Pinout

Pin	Function
GPIO0	Panel Button
GPIO12	PWM Green
GPIO13	PWM Red
GPIO14	PWM Blue

Status LED Not Implemented

The user manual says that the power led on the panel will flash on initialisation (wifi status?). I have not been able to determine what pin this led is connected so this configuration does not support status_led.

Configuration

substitutions:
  name: "rgb-01"
  friendly_name: "RGB 01"
  project_name: "holman.CLXRGB60"
  project_version: "1.0"
  device_description: "RGB Light"

esphome:
  name: "${name}"
  comment: "${device_description}"
  project:
    name: "${project_name}"
    version: "${project_version}"

esp8266:
  board: esp01_1m

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "your key"

ota:
  password: "your password"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Rgb-01 Fallback Hotspot"
    password: "fallback password"

captive_portal:

sensor:
  - platform: wifi_signal
    name: "${friendly_name} wifi signal"
    update_interval: 600s
  - platform: uptime
    name: Uptime Sensor
    id: uptime_sensor
    update_interval: 60s
    disabled_by_default: true
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            state: !lambda |-
              int seconds = round(id(uptime_sensor).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? to_string(days) + "d " : "") +
                (hours ? to_string(hours) + "h " : "") +
                (minutes ? to_string(minutes) + "m " : "") +
                (to_string(seconds) + "s")
              ).c_str();

#################################
binary_sensor:
  # Front Panel On/Off
  - platform: gpio
    pin:
      number: GPIO0
      inverted: true
      mode:
        input: true
        pullup: true
    name: "${friendly_name} Panel Button"
    id: panelButton
    on_click:
      min_length: 50ms
      max_length: 350ms
      then:
        - light.toggle: rgbLight

light:
  - platform: rgb
    name: "RGB Lights"
    red: output_component_red
    green: output_component_green
    blue: output_component_blue
    effects:
      # Use default parameters:
      - random:
      # Customize parameters
      - random:
          name: "Slow Random Effect"
          transition_length: 30s
          update_interval: 30s
      - random:
          name: "Fast Random Effect"
          transition_length: 4s
          update_interval: 5s
      - pulse:
      - pulse:
          name: "Fast Pulse"
          transition_length: 0.5s
          update_interval: 0.5s
      - pulse:
          name: "Slow Pulse"
          # transition_length: 1s      # defaults to 1s
          update_interval: 2s
      - strobe:
      - strobe:
          name: Strobe Effect With Custom Values
          colors:
            - state: true
              brightness: 100%
              red: 100%
              green: 90%
              blue: 0%
              duration: 500ms
            - state: false
              duration: 250ms
            - state: true
              brightness: 100%
              red: 0%
              green: 100%
              blue: 0%
              duration: 500ms
      - flicker:
      - flicker:
          name: Flicker Effect With Custom Values
          alpha: 95%
          intensity: 1.5%

output:
  - platform: esp8266_pwm
    id: output_component_red
    pin: GPIO13
  - platform: esp8266_pwm
    id: output_component_green
    pin: GPIO12
  - platform: esp8266_pwm
    id: output_component_blue
    pin: GPIO14

button:
  - platform: restart
    id: restart_button
    name: "${friendly_name} Restart"
    disabled_by_default: true

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "${friendly_name} IP Address"
      disabled_by_default: true
    bssid:
      name: "${friendly_name} BSSID"
      disabled_by_default: true
  - platform: template
    name: Uptime
    id: uptime_human
    icon: mdi:clock-start
    entity_category: diagnostic