Sonoff POWR2

Product Images

GPIO Pinout

Pin	Function
GPIO0	Push Button (HIGH = off, LOW = on)
GPIO12	Relay and its status LED
GPIO13	Blue LED (HIGH = off, LOW = on)
GPIO1	RX pin (for serial programming)
GPIO3	TX pin (for serial programming)

Basic Configuration

As the only controllable LED is the Blue LED, it is configured here to use the status_led light component, which will take over the LED in the event of a error/warning state, such as when WiFi is disrupted.

# Basic Config
substitutions:
  update_interval: 60s
  name: "sonoff-pow-r2"
  ota_password: "your_ota_password_here"

esphome:
  name: "${name}"

esp8266:
  board: esp01_1m

logger:
  baud_rate: 0

# Enable Home Assistant API
api:

ota:
  - platform: esphome
    password: "${ota_password}"

wifi:
  networks:
    - ssid: !secret wifi_ssid
      password: !secret wifi_password

uart:
  rx_pin: RX
  baud_rate: 4800
  parity: EVEN

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    name: Sonoff POW Button
    on_press:
      - switch.toggle: dummybutton

sensor:
  - platform: cse7766
    current:
      name: "Sonoff Pow R2 Current"
      filters:
        - throttle_average: ${update_interval}
    voltage:
      name: "Sonoff Pow R2 Voltage"
      filters:
        - throttle_average: ${update_interval}
    power:
      name: "Sonoff Pow R2 Power"
      filters:
        - throttle_average: ${update_interval}
    energy:
      name: "Sonoff Pow R2 Energy"
      filters:
        - throttle: ${update_interval}
    apparent_power:
      name: "Sonoff Pow R2 Apparent Power"
      filters:
        - throttle_average: ${update_interval}
    power_factor:
      name: "Sonoff Pow R2 Power Factor"
      filters:
        - throttle_average: ${update_interval}

switch:
  - platform: template
    name: Sonoff POW Relay
    optimistic: true
    id: dummybutton
    turn_on_action:
      - switch.turn_on: relay
    turn_off_action:
      - switch.turn_off: relay
  - platform: gpio
    id: relay
    pin: GPIO12

light:
  - platform: status_led
    name: Sonoff POW Blue LED
    id: pow_blue_led
    pin:
      number: GPIO13
      inverted: True