Skip to main content
Device Type:plug
Electrical Standard:ukuseuau
Board:esp8266

Sonoff S26

GPIO Pinout​

PinFunction
GPIO0Push Button (HIGH = off, LOW = on)
GPIO12Relay and Red LED
GPIO13Blue Status LED

Flashing via serial​

To put the device into flash mode:

  • hold the button
  • connect board to the 5V (do not connect it to the AC)
  • release the button
  • start flashing

Basic Configuration​

# Basic Config
esphome:
  name: sonoffs26_1

esp8266:
  board: esp01_1m
  board_flash_mode: dout

wifi:
  ssid: "ssid"
  password: "wifi_password"
  ap:
    ssid: "ap_ssid"
    password: "Password"
  domain: ".domain.com"

status_led:
  pin:
    number: GPIO13
    inverted: false
logger:

api:
  encryption:
    key: !secret api_encryption_key

ota:
  password: "OTA_password"

web_server:

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    name: "Sonoff S26_1 Button"
    on_press:
      - switch.toggle: relay
  - platform: status
    name: "Sonoff S26_1 Status"

sensor:
  - platform: wifi_signal
    name: "sonoffs26_1 WiFi Signal"
    update_interval: 60s
switch:
  - platform: gpio
    name: "Sonoff S26_1 Relay"
    pin: GPIO12
    id: "relay"
  - platform: restart
    name: "sonoffs26_1 Restart"